DR PREMIER RAPIDFIRE Instrucciones de operaciones Pagina 16

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 32
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 15
16 DR
®
PREMIER RAPIDFIRE™ LOG SPLITTER
Chapter 4: Maintaining The DR PREMIER RAPIDFIRE LOG SPLITTER
Regular maintenance is the way to ensure the best performance and long life of your machine. Please refer to this manual and the
engine manufacturer's owner's manual for maintenance procedures. Service intervals listed in the checklist below supersede
those listed in the engine manufacturer's owner's manual.
Regular Maintenance Checklist
PROCEDURE BEFORE EACH
USE
EVERY 5
HOURS
EVERY 10
HOURS
EVERY 25
HOURS
E
VERY 100
HOURS
Check Engine Oil Level
Check General Equipment Condition
Perform Rail Maintenance
Check Belt
Check the condition of the electrical cord.
Grease Rack
Grease Engagement Fittings
Check Tire Pressure
Clean Engine Exterior and Cooling Fins
Change Engine Oil 1
st
time 5 hours
Replace Air Filter
Replace Spark Plug
Engine Service
Refer to the engine manufacturer’s manual for engine maintenance.
Lubrication
All Bearings of your Splitter are sealed units and should have sufficient lubricant to last the life of your machine with normal use.
Perform machine lubrication per the following instructions.
Greasing the Engagement Fittings
Tools and Supplies needed:
Two 9/16" Wrenches
9/16" Socket and Ratchet
Extended Hose Grease Gun with all Purpose Grease
Clean Rags
1. Remove the long Flange Bolt and Locknut that secures the lower portion of
the Guards to the Frame using two 9/16" Wrenches (Figure 23).
2. Remove the five short Flange Bolts and Locknuts that secure the Guard
Flanges together using two 9/16" Wrenches and remove the left side Guard
from the Splitter.
Left Side Guard
Short
Flange
Bolts
Figure 23
Safety Interlock Lever
Short
Flange
Bolts
Long
Flange
Bolt
Before performing any maintenance procedure or inspection, stop the engine, wait five minutes to allow all parts to cool.
Disconnect the spark plug wire, keeping it away from the spark plug.
Vista de pagina 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 31 32

Comentarios a estos manuales

Sin comentarios